Enhancement of turbulent scalar mixing and its application by a multihole nozzle in selective catalytic reduction of NOx

The mixing characteristics of a passive scalar in the turbulent flow of a selective catalytic reduction process were numerically and experimentally investigated, focusing especially on an injection nozzle with multiple holes for the reducing agent. The multihole injection nozzle studied has six holes that are perpendicular to the ambient flue gas flow and are located near the tip of the nozzle. Large eddy simulation was applied to the turbulent flow and mixing fields to elucidate the mixing mechanism of the proposed nozzle compared with the single-hole nozzle that is commonly used in the conventional selective catalytic reduction process. From the results, there exist broader regions of higher turbulent intensities for the multihole nozzle than for the conventional single-hole nozzle. These regions are well matched with the positions of high vorticity in the near upstream region of the jet flow issuing from the multiple holes of the nozzle. Consequently, the high turbulent intensities and vorticity magnitudes lead to intensified mixing between the flue gas and the reducing agent. Hence, the most suitable molar ratio between NOx and the reducing agent for the catalytic reaction can be easily obtained within a shorter physical mixing length as a result of the enhanced scalar mixing. Finally, the numerical results were applied to a trial design version of a multihole nozzle, and this nozzle was experimentally tested to confirm its mixing performance.     

Removal of arsenic in tailings by soil flushing and the remediation process monitoring

In order to investigate the optimum conditions for the application of soil flushing of arsenic, a batch test was carried out using EDTA at various concentration and pH levels. Based on the optimum condition derived from the batch test, a column test was conducted to examine the feasibility of the soil-flushing technology under field-equivalent conditions. In this column test, a low flushing solution flow rate showed a significantly higher As removal efficiency (71.6%) than a high flow rate (56.3%). TCLP (toxicity characteristic leaching procedure) and a seed germination test were carried out to monitor the toxicity both during and after the treatment. The finally treated tailings were shown to be significantly remediated, having a reduced toxicity by both the TCLP and seed germination tests.     

Effects of stream hydraulic conditions on foraging strategies of false dace, Pseudorasbora parva, in the lentic ecosystem

The effects of current velocity on the foraging behavior of false dace, Pseudorasbora parva, were examined in a zero velocity (stagnant) condition, and at four flow rates (5, 7, 11 and 16 cm per second). In stagnant water, the fish displayed a cruise-searching pattern, but they used a drift-feeding foraging tactic in flowing water. The shape of the transverse field of reaction field was elliptical in the stagnant condition, whereas their downward regions were restricted under the flowing conditions. The fish had a blind spot oriented directly in front of their reaction field. Although the relative swimming speed (with considering the against current velocity) increased with increasing flow velocity, the absolute search speed (ignore the against current velocity) showed about 1.2 fish body length per second at stagnant water and low flow velocity. The results of feeding rates showed stop-and wait (driff-feeding) foraging strategy is more efficient in flowing water because prey drift directly towards the fish and prey easily detected.     

The effect of emergent macrophytes on the dynamics of sulfur species and trace metals in wetland sediments

This study focuses on the effect of plants on the biogeochemistry of sulfur species and the mobility of heavy metals in wetland sediments. Results showed that, in the presence of plants, sediments had elevated sulfate concentrations in the rhizosphere during the growing season, ranging from 0.2 to 6.20 mmol L(-1), whereas only a small difference in the sulfate profiles between vegetated and non-vegetated sediments was observed during senescence. Based on the sulfate concentration increase, the oxygen release rate from the roots to achieve the corresponding oxidation of sulfide was estimated as 0.85 g m(-2) day(-1). Evapotranspiration-induced advection is a major contributor to the transport of sulfate from the water column into the sediments, and also allows dissolved trace metals (i.e. Cd, Pb, and Zn) to be transported into the sediments and react with the acid volatile sulfide pool, resulting in the immobilization of trace metals in these sediments.     

Reductive dissolution and sequestration of arsenic by microbial iron and thiosulfate reduction

Environmental Geochemistry and Health - Iron oxide and oxy-hydroxide are commonly used for remediation and rehabilitation of arsenic (As)-contaminated soil and water. However, the stability of As...     

Colloid mobilization and heavy metal transport in the sampling of soil solution from Duckum soil in South Korea

Environmental Geochemistry and Health - Colloid mobilization is a significant process governing colloid-associated transport of heavy metals in subsurface environments. It has been studied for the...     

不同好氧预处理方式对餐厨垃圾产甲烷的影响

为了研究不同好氧预处理方式对餐厨垃圾厌氧消化产甲烷的影响,通过建立3个模拟厌氧生物反应器,研究了传统厌氧生物反应器C1、上层好氧预处理-厌氧生物反应器C2和底部好氧预处理-厌氧生物反应器C3 3种不同操作条件下的产甲烷过程.结果表明,挥发性有机酸的累积使C1始终处于产甲烷滞后阶段;而C2、C3的好氧预处理通过加快易水解酸化组分和过量挥发性有机酸的好氧降解,有效缓解了酸性抑制,产甲烷滞后时间明显缩短至10 d内.第32天C2停止上层曝气后,在27 d内甲烷浓度达到了50％以上,同时,产甲烷速率迅速上升,并在第81天可达到峰值773 mL/(kg·d).C3在第11天停止底部曝气后,虽然经过22 d的时间甲烷浓度即上升至50％,但之后产甲烷速率经历回落阶段后再次逐渐上升,在实验结束时仅达到517 mL/(kg·d).上层曝气的好氧预处理方式所需曝气时间相对较长,但其产甲烷启动快,与底部曝气相比,其后期的甲烷化过程更稳定并可达到较高的产甲烷速率.     

Photocatalytic reduction of carbon dioxide over Cu/TiO<Subscript>2</Subscript> photocatalysts

The photocatalytic reduction of CO₂ with H₂O was investigated using Cu/TiO₂ photocatalysts in aqueous solution. For this purpose, Cu/TiO₂ photocatalysts (with 0.2, 0.9, 2, 4, and 6 wt.% of Cu) have been synthesized via sol-gel method. The photocatalysts were extensively characterized by means of inductively coupled plasma optical emission spectrometry (ICP-OES), N₂ physisorption (BET), XRD, UV-vis DRS, FT-IR, Raman spectroscopy, TEM-EDX, and photoelectrochemical measurements. The as-prepared photocatalysts contain anatase as a major crystalline phase with a crystallite size around 13 nm. By increasing the amount of Cu, specific surface area and band gap energy decreased in addition to the formation of large agglomeration of CuO. Results revealed that the photocatalytic reduction of CO₂ decreased in the presence of Cu/TiO₂ in comparison to pure TiO₂, which might be associated to the formation of CuO phase acting as a recombination center of generated electron-hole pair. Decreasing of photoactivity can also be connected with a very low position of conduction band of photocatalysts with high Cu content, which makes H₂ production necessary for CO₂ reduction more difficult.     

The potential implementation of green infrastructure assessment using high-resolution National Agriculture Imagery Program data for sustainable hazard mitigation

As green infrastructure gets its attention in hazard mitigation, it is necessary to improve general understanding on what makes green infrastructure important for hazard and resiliency research. To better understand how green infrastructure fits with more traditional notions of structural and nonstructural mitigation, this study examines the relationship between green infrastructure and ‘structural and nonstructural’ mitigation approaches for hazard mitigation. Also, this study discusses a new measurement of locational aspects and spatial patterns of green infrastructure by utilizing high-resolution data in urban areas, and its potential implementation in hazard mitigation. Compared to previous research using land-use land-cover datasets, the normalized difference vegetation index (NDVI) utilizing National Agriculture Imagery Program dataset provides an ability to capture green infrastructure in greater detail. A visual comparison suggests that the NDVI data are able to capture and identify more types of ‘green’ land uses in Harris County. The total green infrastructure percentages for Harris County, Texas, based on 1-m high resolution were found to be 61.5% of the area, compared to the 51.5% based on the National Land Cover Database. This study provides support for utilizing high-resolution data to establish guidelines for green infrastructure’s spatial characteristics and sustainable hazard mitigation. The outcomes of this study will be helpful in the strategic planning and implementation of green infrastructure in urban areas with hazard issues.